35-pin control connector
- Purpose
- 35-pin control connector
- Connector / terminal
- TE 776230-1
- Applicable models
- HL-M2030A-24 / HL-M2030A-48 / HL-M2030A-72 / HL-M2030A-96 / HL-M2030A-144 / HL-M2030A-160
| Pin | Signal | Function | Electrical parameters / notes |
|---|---|---|---|
| 1 | DO1 | Digital output port 1 | High-side output; maximum load capacity 15A |
| 2 | 24V+ | Controller supply V+ | 12V or 24V input |
| 3 | 24V+ | Controller supply V+ | 12V or 24V input |
| 4 | GND | Controller supply ground | |
| 5 | GND | Controller supply ground | |
| 6 | DI_02 | Digital input signal 2 | Configurable active-high / active-low level |
| 7 | CAN-L | CAN low | |
| 8 | CAN-H | CAN high | |
| 9 | M1-NTC2 | Motor 1 Temperature sensor input 2 | |
| 10 | M1-NTC1 | Motor 1 Temperature sensor input 1 | |
| 11 | M2-EXC-OL | Motor 2 Resolver excitation output- | |
| 12 | M2-EXC-OH | Motor 2 Resolver excitation output+ | |
| 13 | RELAY-SIG | Main relay low-side control output | |
| 14 | PW_EN | Enable input | Enabled by the power supply |
| 15 | M1-Z+ | Motor 1 Encoder Z+ | |
| 16 | M1-Z- | Motor 1 Encoder Z- | |
| 17 | DI_01 | Digital input signal 1 | Configurable active-high / active-low level |
| 18 | AI_IN1 | Analog input signal 1 | Voltage type by default; may be multiplexed as current type |
| 19 | AI_IN2 | Analog input signal 2 | Voltage type by default; may be multiplexed as current type |
| 20 | M2-NTC2 | Motor 2 Temperature sensor input 2 | |
| 21 | M2-NTC1 | Motor 2 Temperature sensor input 1 | |
| 22 | M1-EXC-OL | Motor 1 Resolver excitation output- | |
| 23 | M1-EXC-OH | Motor 1 Resolver excitation output+ | |
| 24 | DO2 | Digital output port 2 | High-side output; maximum load capacity 9A |
| 25 | 5Vout | 5V output | Load capacity: maximum 0.3A |
| 26 | M2-SIN_L/A- | Motor 2 SIN-/ or Encoder A- | |
| 27 | M2-SIN_H/A+ | Motor 2 SIN+/ or Encoder A+ | |
| 28 | M1-SIN_H/A+ | Motor 1 SIN+/ or Encoder A+ | |
| 29 | M1-COS_H/B+ | Motor 1 COS+/ or Encoder B+ | |
| 30 | M1-COS_L/B- | Motor 1 COS-/ or Encoder B- | |
| 31 | M1-SIN_L/A- | Motor 1 SIN-/ or Encoder A- | |
| 32 | M2-Z+ | Motor 2 Encoder Z+ | |
| 33 | M2-Z- | Motor 2 Encoder Z- | |
| 34 | M2-COS_H/B+ | Motor 2 COS+/ or Encoder B+ | |
| 35 | M2-COS_L/B- | Motor 2 COS-/ or Encoder B- |
Source: product catalog, series starts on page 17

