Motor Controllers

HL-M2020A

A dual motor-controller series for equipment platforms that combine traction, hydraulic-pump or auxiliary motor functions.

HL-M2020A product image

Key parameters

Voltage

24 – 160 V

Peak current

800 A

Protection

IP65

Temperature

-40 – 85 ℃

Cooling

Natural, forced-air or liquid cooling options

Communication / I/O

Two-in-one drive I/O, integrated braking unit; magnetic encoder / Hall / resolver / sine-cosine encoder support

Dimensions

212 × 155 × 92 mm

Model matrix

ModelVoltagePeak currentRated current
HL-M2020A-2424 V800 A S2 2 min rms390 A
HL-M2020A-4848 V700 A S2 2 min rms330 A
HL-M2020A-7272 V550 A S2 2 min rms300 A
HL-M2020A-9696 V450 A S2 2 min rms250 A
HL-M2020A-144144 V400 A S2 2 min rms180 A
HL-M2020A-160160 V300 A S2 2 min rms150 A

Features

  • Power-stage and thermal design for equipment integration.
  • Control functions selected around the motor, feedback device and duty cycle.
  • CAN and I/O configuration confirmed against the vehicle or equipment interface.

Typical application directions: Aerial work platforms, Sanitation vehicles, Autonomous vehicles, Logistics platforms

Connectors & pin definitions

Two-in-one drive I/O, integrated braking unit; magnetic encoder / Hall / resolver / sine-cosine encoder support

35-pin control connector · TE 776230-1

35-pin control connector

Purpose
35-pin control connector
Connector / terminal
TE 776230-1
Applicable models
HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160
PinSignalFunctionElectrical parameters / notes
1DO1Digital output port 1High-side output; load capacity 3A
2DO5Digital output port 5High-side output by default, 3A load capacity May be multiplexed as a low-side output, 4A load capacity
3DO3Digital output port 3High-side output by default, 3A load capacity; multiplexed with low-side precharge relay control
4DI1Digital input port 1Configurable active-high / active-low level
5SIN+/A+Resolver SIN+ or Encoder A+
6COS+/B+Resolver COS+ or Encoder B+
724V-24V supply negativeController supply ground
8NTC_INMotor temperature sensor input
9DI2Digital input port 2Configurable active-high / active-low level
10DI3Digital input port 3Configurable active-high / active-low level
11DI4Digital input port 4Configurable active-high / active-low level
12DI5Digital input port 5Configurable active-high / active-low level
1315V15V outputLoad capacity: maximum 0.3A
145V5V outputLoad capacity: maximum 0.3A
15DI6Digital input port 6Configurable active-high / active-low level
16AI_IN1Analog input port 1Configurable current / voltage type
17DI7Digital input port 7Configurable active-high / active-low level
18AI_IN2Analog input port 2Configurable current / voltage type
19DI8/PRE-CHA-VOTDefault Digital input signal 8 multiplexed with Precharge voltage inputConfigurable active-high / active-low level
20NTC-GNDMotor temperature sensor ground
21AI_IN3/PULS+Default Analog input port 3 multiplexed with Motor pulse signal+Configurable current / voltage type
22M1_Z+Encoder Z+
23CANH/485BDefault CAN high multiplexed with RS-485B
2424V+24V supply positiveController supply
25DO4/24V+Default Digital output port 4 multiplexed with 24V supply positiveWhen the 24V load is relatively large, this pin may be configured as a supply input.
26PW_ENController enable
27DO2Digital output port 2High-side output; load capacity 3A
28DO7 SIN-/A+Default Digital output port 7 multiplexed with Resolver SIN- or Encoder A+High-side output; load capacity 3A
29DO6Digital output port 6High-side output by default, 3A load capacity Configurable as a low-side output, 4A load capacity
30DO8 COS-/B-Default Digital output port 8 Resolver COS- or Encoder B-High-side output; load capacity 3A
31DO9EXC-HODigital output port 9 by default; multiplexed with resolver excitation positive signalHigh-side output; load capacity 3A
32DO10/EXC-LODigital output port 10 by default; multiplexed with resolver excitation positive signalHigh-side output; load capacity 3A
33DO11/PULS-Default Digital output port 11 multiplexed with Motor pulse signal-High-side output; load capacity 3A
34DO12/Z-Default Digital output port 12 multiplexed with Encoder Z-High-side output; load capacity 3A
35CAN_H/485ADefault CAN high multiplexed with RS-485A

Source: product catalog, series starts on page 19

Wiring

  • One AC motor plus one DC motor.

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19
  • Independent AC or DC motor drive.

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19
  • One hydraulic pump and two traction motors (with reversing).

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19
  • AC motor support includes induction and permanent-magnet synchronous motors.

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19
  • Multiple speed-encoder formats are supported.

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19
  • Supports magnetic encoders, Hall sensors, ABZ sensors, resolvers and absolute sine-cosine position encoders.

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19

Dimensions & mounting

  • Overall dimensions: Length 212, Width 155, Height 92

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19

Diagnostics & notes

  • Fault diagnosis, monitoring and protection functions support system reliability.

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19
  • Integrated braking unit.

    Applicable models: HL-M2020A-24 / HL-M2020A-48 / HL-M2020A-72 / HL-M2020A-96 / HL-M2020A-144 / HL-M2020A-160 · Catalog series starts on page 19

Documents

Use the full catalog for offline reference and archiving.

Start a conversation

Confirm the match against the equipment duty cycle

Vehicle and actuator conditions differ. Confirm the selection range against the actual project requirements.

Contact us