Motor Controllers

HL-M2015A

A motor-controller series for high-power equipment drives, selected around motor type, duty cycle and project interface.

HL-M2015A product image

Key parameters

Voltage

24 – 160 V

Peak current

550 A

Protection

IP65

Temperature

-40 – 85 ℃

Cooling

Natural or forced-air cooling

Supported motor types

AC induction motors, Permanent-magnet synchronous motors

Communication / I/O

Multifunction I/O, CAN communication, resolver / magnetic encoder / HALL and other sensors

Dimensions

180 × 138 × 65 mm

Model matrix

ModelVoltagePeak currentRated current
HL-M2015A-2424 V550 A S2 2 min rms280 A
HL-M2015A-4848 V450 A S2 2 min rms260 A
HL-M2015A-7272 V400 A S2 2 min rms240 A
HL-M2015A-9696 V350 A S2 2 min rms180 A
HL-M2015A-144144 V300 A S2 2 min rms150 A
HL-M2015A-160160 V250 A S2 2 min rms130 A

Features

  • Power-stage and thermal design for equipment integration.
  • Control functions selected around the motor, feedback device and duty cycle.
  • CAN and I/O configuration confirmed against the vehicle or equipment interface.

Typical application directions: Electric sightseeing vehicles, Electric forklifts, Aerial work platforms, Sanitation vehicles, Autonomous vehicles, Logistics platforms

Connectors & pin definitions

Multifunction I/O, CAN communication, resolver / magnetic encoder / HALL and other sensors

Control signal connector · TE 776230-1

Control signal connector

Purpose
Control signal connector
Connector / terminal
TE 776230-1
Applicable models
HL-M2015A-24 / HL-M2015A-48 / HL-M2015A-72 / HL-M2015A-96 / HL-M2015A-144 / HL-M2015A-160
PinSignalFunctionElectrical parameters / notes
1DO1Digital output port 1High-side output; maximum load capacity 15A
2COS_L/B-COS-/ or Encoder B-
324V+24V+ supplyController supply 24V+ input
424V+24V+ supplyController supply 24V+ input
5GNDGroundController ground
6GNDGroundController ground
7DI_01Digital input signal 1
815V15V outputLoad capacity: maximum 0.3A
9EXC_O-Resolver excitation-
10PW_ENEnable input (24V)Controller enable input signal
11EXC_O+Resolver excitation+
12RELAY_SIGMain relay control output (low-side control)
13COS_H/B+COS+/ or Encoder B+
14SIN_H/A+SIN+/ or Encoder A+
15SIN_L/A-SIN-/ or Encoder A-
16DI_06Digital input signal 6
17DI_05Digital input signal 5
18AI_IN1Analog input signal 1
19DI_04Digital input signal 4
20Z+Encoder Z+
21Z-Encoder Z-
22NTC_INMotor temperature sensor input
23NTC_GNDMotor temperature sensor ground
24PRE_CHARGE_INPower supply precharge input
255V5V outputLoad capacity: maximum 0.3A
26DI_07Digital input signal 7
27PULS+Motor pulse signal+
28PULS-Motor pulse signal-
29DI_02Digital input signal 2
30DI_03Digital input signal 3
31DO2Digital output port 2Low-side control; load capacity 4A
32AI_IN2Analog input port 2
33DO3Digital output port 3Low-side control; load capacity 4A
34CAN_L/485BCAN low/ multiplexed with RS-485B
35CAN_H/485ACAN high/ multiplexed with RS-485A

Source: product catalog, series starts on page 15

Wiring

  • The vehicle low-voltage supply powers control signals.

    Applicable models: HL-M2015A-24 / HL-M2015A-48 / HL-M2015A-72 / HL-M2015A-96 / HL-M2015A-144 / HL-M2015A-160 · Catalog series starts on page 15
  • Supported sensor types include resolvers, sine / cosine decoding, magnetic AB single-ended decoding, magnetic AB single-ended + PWM, magnetic AB differential decoding, and Hall position estimation.

    Applicable models: HL-M2015A-24 / HL-M2015A-48 / HL-M2015A-72 / HL-M2015A-96 / HL-M2015A-144 / HL-M2015A-160 · Catalog series starts on page 15

Dimensions & mounting

  • Overall dimensions: Length 180, Width 138, Height 65

    Applicable models: HL-M2015A-24 / HL-M2015A-48 / HL-M2015A-72 / HL-M2015A-96 / HL-M2015A-144 / HL-M2015A-160 · Catalog series starts on page 15

Diagnostics & notes

  • Fault diagnosis, monitoring and protection functions support system reliability.

    Applicable models: HL-M2015A-24 / HL-M2015A-48 / HL-M2015A-72 / HL-M2015A-96 / HL-M2015A-144 / HL-M2015A-160 · Catalog series starts on page 15

Documents

Use the full catalog for offline reference and archiving.

Start a conversation

Confirm the match against the equipment duty cycle

Vehicle and actuator conditions differ. Confirm the selection range against the actual project requirements.

Contact us