Motor Controllers

HL-M2006V

A high-voltage motor-control series with voltage, current and temperature monitoring and CAN communication.

HL-M2006V product image

Key parameters

Voltage

220 – 800 V

Peak current

25 A

Protection

IP65

Temperature

-40 – 85 ℃

Cooling

Aluminium-base natural cooling

Communication / I/O

7 optically isolated DI / 3 DO rated 2–3 A / one 5 V 0.3 A output / CAN

Dimensions

196 × 160 × 82 mm

Model matrix

ModelVoltagePeak currentRated current
HL-M2006V-220220 V25 A Peak value; see catalog for duty condition15 A
HL-M2006V-560560 V20 A Peak value; see catalog for duty condition10 A
HL-M2006V-800800 V15 A Peak value; see catalog for duty condition7 A

Features

  • Power-stage and thermal design for equipment integration.
  • Control functions selected around the motor, feedback device and duty cycle.
  • CAN and I/O configuration confirmed against the vehicle or equipment interface.

Typical application directions: Application suitability is confirmed against the selected model and project requirements.

Connectors & pin definitions

7 optically isolated DI / 3 DO rated 2–3 A / one 5 V 0.3 A output / CAN

35-pin control connector · TE 776230-1; HV input connector · FE20A02XB-14K · Mating part: F3-C10190-03

35-pin control connector

Purpose
35-pin control connector
Connector / terminal
TE 776230-1
Applicable models
HL-M2006V-220 / HL-M2006V-560 / HL-M2006V-800
PinSignalFunctionElectrical parameters / notes
1DO1High-side outputLoad capacity 3A
2Encoder B-Encoder B-
3Supply input+Module supply positive input, 12V or 24V
4Supply input+Module supply positive input, 12V or 24V
5Supply input-Module supply negative input
6Supply input-Module supply negative input
7DI01Digital inputConfigurable active-high / active-low level; active-high by default
8AI02Analog inputConfigurable current / voltage type; voltage type by default
9Encoder Z-Encoder Z-
10Enable inputModule enable inputActive-high
11RS485ARS485A
12RS485BRS485B
13Encoder B+/B/HALL-BFeedback signal
14Encoder A+/A/HALL-AFeedback signal
15Encoder A-Encoder A-
16PWM-PWM- negative pulse signal
17DI03Digital inputConfigurable active-high / active-low level; active-high by default
18AI01Analog inputConfigurable current / voltage type; voltage type by default
19Isolated groundReturn ground for external 5V / 15V outputs
20AI03Analog inputConfigurable current / voltage type; voltage type by default
21Encoder Z+/Z/HALL-CFeedback signal
22Temperature sensorMotor temperature sensor
23Temperature sensor groundMotor temperature sensor (isolated ground terminal)
24Supply output24V (2A) or 48V (1A)Configured as required
255V supply output5V supply outputLoad 0.3A
2615V supply output15V supply outputLoad 0.3A
27PWM+PWM+ positive pulse signal output
28DI04Digital inputConfigurable active-high / active-low level; active-high by default
29DI02Digital inputConfigurable active-high / active-low level; active-high by default
30NCUnconnected
31DO2High-side outputLoad capacity 3A
32NCUnconnected
33DO3Low-side outputLoad capacity 5A
34CAN-LCAN bus L
35CAN-HCAN bus H

Source: product catalog, series starts on page 25

HV input connector

Purpose
HV input connector
Connector / terminal
FE20A02XB-14K
Mating part
F3-C10190-03
Applicable models
HL-M2006V-220 / HL-M2006V-560 / HL-M2006V-800
PinSignalFunctionElectrical parameters / notes
PB-Braking resistor-External braking resistorImplemented as required
PB+Braking resistor+External braking resistorInternally connected to VBUS+
VBUS+HV positiveExternal high-voltage DC bus positive input
VBUS-HV negativeExternal high-voltage DC bus negative input
UMotor phase UMotor phase wire U
VMotor phase VMotor phase wire V
WMotor phase WMotor phase wire W
RPhase A input380 Vac phase A or 220 Vac lineImplemented as required
SPhase B input380 Vac phase B or 220 Vac neutralImplemented as required
TPhase C input380 Vac phase C or 220 Vac line / neutral / unconnectedImplemented as required
PEGroundGround terminal (protective earth)

Source: product catalog, series starts on page 25

Dimensions & mounting

  • Overall dimensions: Length 196, Width 160, Height 82

    Applicable models: HL-M2006V-220 / HL-M2006V-560 / HL-M2006V-800 · Catalog series starts on page 25
  • Mounting hole spacing: Length 182, Width 146

    Applicable models: HL-M2006V-220 / HL-M2006V-560 / HL-M2006V-800 · Catalog series starts on page 25

Diagnostics & notes

  • Fault diagnosis, monitoring and protection functions support system reliability.

    Applicable models: HL-M2006V-220 / HL-M2006V-560 / HL-M2006V-800 · Catalog series starts on page 25

Documents

Use the full catalog for offline reference and archiving.

Start a conversation

Confirm the match against the equipment duty cycle

Vehicle and actuator conditions differ. Confirm the selection range against the actual project requirements.

Contact us