HeliControl
Application illustration
Aerial Work & Hydraulic Power
Hydraulic pumps and power units require compact, sealed and field-configurable DC or AC motor drives.
Explore the control approachMotor Controllers
HL-M1216
A motor controller for hydraulic-pump applications using series-wound DC motors.
Key parameters
Voltage
24 V
Peak current
360 A
Protection
IP65
Temperature
-40 – 85 ℃
Supported motor types
Brushed DC motors
Communication / I/O
CAN / I/O configuration varies by selected model and project requirements.
Catalog reference
Page 10
Model matrix
| Model | Voltage | Peak current | Rated current |
|---|---|---|---|
| HL-M1216-300 | 24 V | 300 A S2 2 min | 200 A |
| HL-M1216-360 | 24 V | 360 A S2 2 min | 250 A |
Features
- Power-stage and thermal design for equipment integration.
- Control functions selected around the motor, feedback device and duty cycle.
- CAN and I/O configuration confirmed against the vehicle or equipment interface.
Typical application directions: Aerial work platforms, Boom lifts, Hydraulic pumps, Power units
Dimensions
145 × 145 × 68 mm
Connector and I/O summary
CAN / I/O configuration varies by selected model and project requirements.
Connectors: Refer to the current catalog for connector and mating-part information.
Full pin definitions are provided in the available catalog rather than expanded on this page.
Related applications
Application directions to explore
Start a conversation
Confirm the match against the equipment duty cycle
Vehicle and actuator conditions differ. Confirm the selection range against the actual project requirements.