HeliControlSupporting Products
HL-D2002H
A signal-simulation tool for electrical-control development, commissioning and validation.
Key parameters
Voltage
—
Peak current
—
Protection
IP65
Temperature
-40 – 85 ℃
Supported motor types
Motor controllers, Vehicle ECUs / MCUs, Power-distribution control units
Communication / I/O
CAN / I/O configuration varies by selected model and project requirements.
Catalog reference
Page 44
Model matrix
| Model | Voltage | Peak current | Rated current |
|---|---|---|---|
| HL-D2002H | — | — | — |
Features
- Designed to support electrical-control development and validation.
- Signal and interface requirements are confirmed against the intended test task.
- Refer to the current catalog for the applicable configuration.
Typical application directions: Electrical-control system testing, Controller development and commissioning, Signal-simulation validation, Calibration
Dimensions
123.85 × 114.16 × 39.75 mm
Connector and I/O summary
CAN / I/O configuration varies by selected model and project requirements.
Refer to the current catalog for connector information.
Full pin definitions are provided in the available catalog rather than expanded on this page.
Start a conversation
Confirm the match against the equipment duty cycle
Vehicle and actuator conditions differ. Confirm the selection range against the actual project requirements.