Vehicle Control

HL-C8026A

A vehicle-control module for configurable I/O, CAN communication and equipment-system integration.

HL-C8026A product image

Key parameters

Voltage

24 V

Peak current

—

Protection

IP65

Temperature

-40 – 85 ℃

Communication / I/O

8 DI / 4 DO·PWM (maximum 3 A) / 4 AI / dual CAN / 9–36 V

Dimensions

120.5 × 83.5 × 44 mm

Model matrix

ModelVoltagePeak currentRated current
HL-C8026A24 V——

Features

  • I/O allocation and protection are confirmed for the selected model.
  • CAN communication supports system-level coordination.
  • Control logic is matched to the equipment function and interface requirements.

Typical application directions: Application suitability is confirmed against the selected model and project requirements.

Connectors & pin definitions

8 DI / 4 DO·PWM (maximum 3 A) / 4 AI / dual CAN / 9–36 V

26-pin control connector · 6437287-8 · Mating part: 3-1437290-7

26-pin control connector

Purpose
26-pin control connector
Connector / terminal
6437287-8
Mating part
3-1437290-7
Applicable models
HL-C8026A
PinSignalFunctionElectrical parameters / notes
1DI_05Digital input 5
2DI_02Digital input 2
3DI_03Digital input 3
4DI_08Digital input 8
5DO_01Digital output 1
6DO_02Digital output 2
7DO_03Digital output 3
8DI_01Digital input 1
9DI_06Digital input 6
10DI_07Digital input 7
11CAN1_LCAN1 low
12CAN1_H(without termination resistor)CAN1 high
13DO_04Digital output 4
14CAN2_LCAN2 low
15CAN2_H(with termination resistor)CAN2 high
16GNDGround
17GNDGround
18DI4Digital input 4
19DO/PWM output supply12V or 24V
20Controller supply9-36V
21CAN2_H(without termination resistor)CAN2 high
22CAN1_H(with termination resistor)CAN1 high
23AI4Selectable 0-5V / 4-20m A
24AI3Selectable 0-5V / 4-20m A
25AI2Selectable 0-5V / 4-20m A
26AI1Selectable 0-5V / 4-20m A

Source: product catalog, series starts on page 33

Wiring

  • DO/PWM rated voltage supports 12V or 24V systems.

    Applicable models: HL-C8026A · Catalog series starts on page 33
  • PWM output supply can be provided independently.

    Applicable models: HL-C8026A · Catalog series starts on page 33
  • 4 analog inputs supporting 4-20mA current input or 0-5V voltage input.

    Applicable models: HL-C8026A · Catalog series starts on page 33

Dimensions & mounting

  • Overall dimensions: Length 120.5, Width 83.5, Height 44

    Applicable models: HL-C8026A · Catalog series starts on page 33

Diagnostics & notes

  • Four DO/PWM channels, maximum 3A, with short-circuit, overcurrent, overtemperature, undervoltage and overvoltage protection and fault feedback.

    Applicable models: HL-C8026A · Catalog series starts on page 33
  • Real-time DO/PWM output-current monitoring with load open-circuit / short-circuit alarms and protection.

    Applicable models: HL-C8026A · Catalog series starts on page 33

Documents

Use the full catalog for offline reference and archiving.

Start a conversation

Confirm the match against the equipment duty cycle

Vehicle and actuator conditions differ. Confirm the selection range against the actual project requirements.

Contact us