Vehicle Control

HL-C2107

An intelligent switching module for dynamic power allocation, protection and load-state feedback.

HL-C2107 product image

Key parameters

Voltage

24 V

Peak current

—

Protection

IP65

Temperature

-40 – 85 ℃

Communication / I/O

Smart switching and distribution; host communication for dynamic power distribution and overcurrent protection

Dimensions

330 × 156 × 52 mm

Model matrix

ModelVoltagePeak currentRated current
HL-C210724 V——

Features

  • I/O allocation and protection are confirmed for the selected model.
  • CAN communication supports system-level coordination.
  • Control logic is matched to the equipment function and interface requirements.

Typical application directions: Application suitability is confirmed against the selected model and project requirements.

Connectors & pin definitions

Smart switching and distribution; host communication for dynamic power distribution and overcurrent protection

xs1 connector; xs2 connector; xs3 connector; xs4 connector

xs1 connector

Purpose
xs1 connector
Applicable models
HL-C2107
PinSignalFunctionElectrical parameters / notes
1PORecommended wire size(mm²): 1 Software overcurrent protection preset: 9.5A
2PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 8.0A
3PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 5.5A
4PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 7.0A
5DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
6PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 5.0A
7PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 8.0A
10AIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
11Shield ground connectionRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
12PORecommended wire size(mm²): 1 Software overcurrent protection preset: 9.5A
13DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
14DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
15DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
16DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
17Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
19DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
20DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
21CANHRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
22CANLRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
23PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
24DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
25Connected to XS4-11Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
26Connected to XS4-13Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
27Connected to XS4-9Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
28Connected to XS4-10Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
29DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
30PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
31DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
32DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
33DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
34PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
35PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A

Source: product catalog, series starts on page 35

xs2 connector

Purpose
xs2 connector
Applicable models
HL-C2107
PinSignalFunctionElectrical parameters / notes
1PORecommended wire size(mm²): 1.5 Software overcurrent protection preset: 9.5A
2DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
3DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
4PORecommended wire size(mm²): 1.5 Software overcurrent protection preset: 9.5A
5DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
6DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
7PORecommended wire size(mm²): 1.5 Software overcurrent protection preset: 9.5A
8PORecommended wire size(mm²): 1.5 Software overcurrent protection preset: 9.5A
9Recommended wire size(mm²): 0.85 Software overcurrent protection preset: 8.0A
10DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
11DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
12DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
13DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
14DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
15DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
16PORecommended wire size(mm²): 1.5 Software overcurrent protection preset: 9.5A
17DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
18DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
19PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
20DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
21DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
22PORecommended wire size(mm²): 1.5 Software overcurrent protection preset: 9.5A
23PORecommended wire size(mm²): 1.5 Software overcurrent protection preset: 9.5A

Source: product catalog, series starts on page 35

xs3 connector

Purpose
xs3 connector
Applicable models
HL-C2107
PinSignalFunctionElectrical parameters / notes
1DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
2DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
3DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
4PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
5PORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 5.5A
6DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
7Recommended wire size(mm²): 0.5 Software overcurrent protection preset: \
8Recommended wire size(mm²): 0.5 Software overcurrent protection preset: \
9Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
10DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
11DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
12DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
13DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
14AIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
15AIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
16AIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
17AIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
18AIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
19DORecommended wire size(mm²): 0.85 Software overcurrent protection preset: 4.5A
20Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
21\Software overcurrent protection preset: \
22\Software overcurrent protection preset: \
23\Software overcurrent protection preset: \

Source: product catalog, series starts on page 35

xs4 connector

Purpose
xs4 connector
Applicable models
HL-C2107
PinSignalFunctionElectrical parameters / notes
1Recommended wire size(mm²): 0.5 Software overcurrent protection preset: \
2Recommended wire size(mm²): 0.5 Software overcurrent protection preset: \
3Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
4DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
5DIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
6Software overcurrent protection preset: \
7AIRecommended wire size(mm²): 0.85 Software overcurrent protection preset: \
8Software overcurrent protection preset: \
9Connected to XS1-27Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
10Connected to XS1-28Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
11Connected to XS1-25Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
12Software overcurrent protection preset: \
13Connected to XS1-26Recommended wire size(mm²): 0.85 Software overcurrent protection preset: \
14Software overcurrent protection preset: \

Source: product catalog, series starts on page 35

Dimensions & mounting

  • Overall dimensions: Length 330, Width 156, Height 52

    Applicable models: HL-C2107 · Catalog series starts on page 35

Diagnostics & notes

  • Fast short-circuit protection: BTT6010 power switch threshold 90-120A, response under 100us; BTT6030 threshold 60-90A, response under 100us.

    Applicable models: HL-C2107 · Catalog series starts on page 35
  • Overcurrent detection: output stops after 0.5S when the configured current threshold is reached.

    Applicable models: HL-C2107 · Catalog series starts on page 35

Documents

Use the full catalog for offline reference and archiving.

Start a conversation

Confirm the match against the equipment duty cycle

Vehicle and actuator conditions differ. Confirm the selection range against the actual project requirements.

Contact us